Safety Instructions For Reciprocating Saws; Vibration And Noise Reduction; Behaviour In Emergency Situations - Parkside Pasa 20-Li D3 Mode D'emploi

g) Follow all charging instructions
and do not charge the battery
pack or tool outside the
temperature range specified in the
instructions. Charging improperly or
at temperatures outside the specified
range may damage the battery and
increase the risk of the fire.
CAUTION! RISK OF
EXPLOSION! Never charge
non‑rechargeable batteries!
Protect the rechargeable
battery from heat, for
max. 50 °C
example from continuous
exposure to sunlight, fire,
water and moisture. There is
a risk of explosion .
Service
a) Have your power tool serviced
by a qualified repair person using
only identical replacement parts.
This will ensure that the safety of the
power tool is maintained .
b) Never service damaged battery
packs. Service of battery packs
should be only be performed by the
manufactured or authorized service
providers .
˜ Safety instructions for
reciprocating saws
a) Hold the power tool by insulated
gripping surfaces, when
performing an operation where
the cutting accessory may contact
hidden wiring or its own cord.
Cutting accessory contacting a "live"
wire may make exposed metal parts
of the power tool "live" and could
give the operator an electric shock .
12 GB/IE/NI
b) Use clamps or another practical
way to secure and support the
workpiece to a stable platform.
Holding the workpiece by hand or
against your body leaves it unstable
and may lead to loss of control .
c) Wear a dust mask!
WARNING!
m
Do not use any accessories
u
that are not recommended by
PARKSIDE . This can lead to
electric shock and fire.
˜ Vibration and noise
reduction
To reduce the impact of noise and
vibration emission, limit the time of
operation, use low-vibration and low-
noise operating modes as well as wear
personal protective equipment .
Take the following points into account
to minimise the vibration and noise
exposure risks:
Only use the product as intended by
its design and these instructions .
Ensure that the product is in good
condition and well maintained .
Keep tight grip on the handles/grip
surface .
Maintain this product in accordance
with these instructions and keep it
well lubricated (where appropriate) .
Plan your work schedule to spread
any high vibration tool use across a
longer period of time .
˜ Behaviour in emergency
situations
Familiarise yourself with the use of this
product by means of this instruction
manual . Memorise the safety warnings
and follow them to the letter . This will
help to prevent risks and hazards .