Publicité
Step 9
å
Fasten two EXTENSION RAILS (1) to the RIGHT
END (B). Use six 3/8" PAN HEAD SCREWS (25).
å
NOTE: For each EXTENSION RAIL, turn a SCREW
into the hole shown in the enlarged diagram.
Then, slide the inner cartridge of the EXTENSION
RAIL in to find the other holes that line up with the
holes in the END. Turn a SCREW into each hole.
3/8" PAN HEAD SCREW
(6 used in this step)
429514
1
Use these holes.
25
www.sauder.com/service
1
B
1
Open end
Open end
Page 15
Publicité
