Hamilton Beach Commercial BLIZZARD BIC3000-DQ Manuel D'utilisation page 13

Installing Cup Holder
15. Insert cup rest into cup holder.
16. Align dimples on cup rest to flat side on motor shaft.
17. With cup rest in position over shaft, press down firmly
to snap into position.
840297500 EN v13 English_FR.indd 13
Cup Rest
Cup Holder
Dimples on Cup Rest
Flat Side on Shaft
After
Before
"snap"
If you do not feel the cup
rest snap into place, start
over.
13
5/4/18 12:06 PM