Publicité
3
When the Headset is undocked/powered on, Audio from the XBOX will be re-routed to the headset . XBOX will notify on
screen when the headset s assigned .
• While the A50 Headset is undocked, you can power it off at any time to resume audio playback to your TV/Speakers .
• Note: the included Dolby Atmos license is hardware bound to your A50 . Activating and using this feature requires
a valid USB connection to the console and power supplied to the A50 Base Station .
4.4 PlayStation
To use A50 with your PlayStation, please make sure it is first configured .
Configure
1
Place A50 headset in the Base Station dock and powered on .
2
Use the PLAYSYNC button to set it in PS mode, an on screen notification will indicate the headset has been detected .
3
In Setting > Sound > Audio Output:
• For Output Device, choose USB Headset (A50) .
• Navigate to the bottom and under Audio Form (Priority), select Linear PCM .
4
Optional: if desired, 3D Audio (Headphones) can be enabled and Audio Profile can be adjusted to your preference .
5
Then in Setting > Sound > Microphone:
• For Input Device, choose USB Headset (A50) .
16 ENGLISH
Publicité
