Télécharger Imprimer la page

Crivit CFMK 7 A1 Traduction Du Mode D'emploi D'origine page 8

Publicité

not trade-approved. After pumping up bike tyres always take the shortest
possible route to a service point which has a trade-approved device. Check
the pressure of the bike tyres there. The device is not designed for use for
anything other than the intended applications, in particular not for any type
of car battery. The mini bike compressor is not designed for continuous
operation to generate pressure for longer than 5 minutes at a time. Store
these instructions in an easily accessible place. Ensure you hand over all
documentation when passing the product on to a third party. Any use that
differs to the intended use as stated is prohibited and potentially dangerous.
Damage or injury caused by misuse and disregarding the above warning is
not covered by the warranty or any liability on the part of the manufacturer.
The device is not intended for commercial use. Commercial use will void the
warranty. The product must only be started up initially by people who have
been trained to do so.
z Package contents
1 Bike mini compressor
1 USB-C charging cable
1 valve adapter for Schrader valves with integrated pressure relief valve at 3 bar
1 valve adapter for Presta valves with integrated pressure relief valve at 7 bar
1 set of operating instructions
z Features
PLEASE NOTE: After unpacking the product, please check that all of
the package contents are present and that the welding trolley is in perfect
condition. Do not use the device if it is defective.
To do this see Fig. A – D:
Bike mini compressor
1
On/Off button for compressor
2
Compressed air outlet
3
Charge input USB-C 5 V
4
8
GB/IE/NI/CY/MT
1 A

Publicité

loading

Produits Connexes pour Crivit CFMK 7 A1

Ce manuel est également adapté pour:

502367 2407