Publicité
z Using the device
z Charging the mini bike compressor
The mini bike compressor
„
plug such as, for example, an appropriate USB AC adapter (operating
peak output voltage U
To do this connect the USB cable
„
device. Then connect the USB cable
connection or an appropriate USB plug socket.
If the On/Off button
„
pack is empty and must be charged.
During the charging process, the On/Off button
„
it lights up green continuously, the rechargeable battery pack is fully
charged.
PLEASE NOTE: USB AC adapter not included in the scope of delivery.
PLEASE NOTE: An undervoltage protection circuit is installed in the
mini bike compressor
deep discharge of the mini bike compressor
the device off once the rechargeable battery pack is fully discharged. In this
case, the device can no longer be switched on or used. Please re-charge the
mini bike compressor
PLEASE NOTE: For safety reasons the device cannot be charged if a
battery cell is defective or deeply discharged. In this case, please contact our
service point.
z Using the mini bike compressor for the first time
Depending on bike valve you are using, fit either the valve adapter for
„
the Schrader valve
To do this screw the valve adapter onto the compressed air outlet
„
the mini bike compressor
16
GB/IE/NI/CY/MT
can be charged with an appropriate USB A
1
5 V
out, max
is flashing red, then the rechargeable battery
2
to protect the device from damage. This prevents a
1
, as described.
1
or the valve adapter for the Presta valve
6
.
1
).
to the USB-C charge input
5
with an appropriate USB power
5
2
and automatically switches
1
of the
4
flashes green. When
.
7
3
of
Publicité
