Safety And Responsibility; Intended Use; Safety Information - GF 582 High Purity Manuel D'utilisation

Instruction manual
2

Safety and responsibility

2.1

Intended use

The pressure reducing valves type 582 are intended to be operated with pure, non-
abrasive liquid media. The product and all of its components are intended to be used
within the permitted pressure and temperature limits and in accordance with their
chemical resistance.
Pressure reducing valve type 582
The pressure reducing valves type 582 are intended to reduce the system pressure,
after installation into a piping system, and to keep it constant at the specified value
to the greatest possible extent.
Foreseeable misuse
The pressure reducing valves type 582 are not intended to be used as shut-off
devices.
The pressure reducing valves type 582 are not intended to be operated with gases or
other compressible media.
2.2

Safety information

In order to provide safety in the plant, the operator is responsible for the following
measures:
 Only use product as intended, see intended use.
 Do not use any damaged or faulty product. Sort out any damaged product
immediately.
 Make sure that the piping system has been installed professionally and that it is
inspected regularly.
 Product and accessories shall only be installed by persons who have the
required training, knowledge or experience.
 Regularly train personnel on all questions pertaining to the locally applicable
regulations on occupational safety and environmental protection, especially on
pressure-retaining pipelines.
32
Safety and responsibility