Publicité
• Do not use multi-group plug with or
without extension cable between the wall
socket and the refrigerator.
3.3 Adjusting the Legs
If the product is not in balanced position,
adjust the front adjustable legs by rotating
them to right or left.
When doing so, pay attention not to jam
your hand between the product and the
ground or between the product and the ad-
justed leg. Danger of injury!
3.4 Hot Surface Warning
The side walls of your product are equipped
with cooler pipes to enhance the cooling
system. High pressure fluid may flow
4 Preparation
Read the "Safety Instructions" sec-
tion first!
4.1 What To Do For Energy Saving
Connecting the product to elec-
tronic energy-saving systems is
harmful, as it may damage the
product.
• This refrigerating appliance is not inten-
ded to be used as a built in appliance.
• Do not keep the refrigerator doors open
for long periods.
• Do not place hot food or beverages into
the refrigerator.
through these surfaces, and cause hot sur-
faces on the side walls. This is normal and
it does not require servicing. Be careful
when you contact these areas.
3.5 Removing the Styrofoam on the
Compressor
Styrofoam is placed on the compressor in
production in order to increase the trans-
port strength of the product. This styro-
foam must be removed during the installa-
tion of the product.
• Do not overfill the refrigerator; blocking
the internal air flow will reduce cooling
capacity.
• Since hot and humid air will not directly
penetrate into your product when the
doors are not opened, your product will
optimize itself in conditions sufficient to
protect your food. Under these circum-
stances, functions and components such
as compressor, fan, heater, defrost, light-
ing, display and so on will operate ac-
cording to the needs by consuming min-
imum energy.
EN / 16
Publicité
