Publicité
3
DESCRIPTION OF THE APPLIANCE
1. Container lid
2. Coffee bean container
3. Grinding adjustment knob
4. Touchscreen display
5. Dispensing nozzle
6. Ground coffee container
7. Adjustable portafilter fork
8. Portafilter fork tightening knob
9. Coffee bean container opening/closing
tab
4
LOCKING THE CONTAINER
Before activating the grinder, it is necessary to fit the coffee bean container (2).
• Insert the container (2) in its seat (Fig. 2), positioning it so the hole is in line with the
screw on the back of the appliance (17).
• Tighten the locking screw (17) (Fig. 3).
5
ADJUSTMENTS AND USE
5.1
PRELIMINARY OPERATIONS
Before starting to work, the appliance must be adjusted on the basis of the type of
coffee blend (the roasting level) and the required degree of grinding.
• Decide the type of coffee blend (the roasting level).
• Decide the degree of grinding.
• After plugging the appliance in, close the coffee bean container by pushing the tab
(9) at the bottom of it (2) (Fig.4). Now you can program the doses.
• Remove the lid (1) from the container (2), then fill the container with coffee beans.
• Refit the lid (1) and pull the tab (9) to let the beans pass through.
• The first calibration was made and tested in the factory, so the grinder is ready for
use.
32
10. Switch-on button
11. Dispensing grammes / dose count
display
12. Continuous dispensing active
13. Decrease button
14. Increase button
15. Single dose button
16. Double dose button
17. Coffee bean container fixing screw
EN
Publicité
