Télécharger Imprimer la page

Publicité

Liens rapides

LEDVANCE CANOPY
Installation Instructions
PERFORMANCE CLASS DUAL
SELECTABLE CANOPY
Featuring the innovative Dual Optics design, this product
offers both Garage and Canopy optics without the need for
any lens changes or switches. Additionally, it features Dual
Selectable options for CCT and wattage, providing flexibility
to meet your specific requirements. It is also Controls Ready,
with a plug-and-play receptacle for standalone or NLC
sensors, making integration with your control systems
effortless.
For warranty coverage, please register at www.ledvanceUS.com
Please Read All Instructions Before Attempting Installation
• TO PREVENT PERSONAL INJURY OR PRODUCT DAMAGE ONLY LICENSED ELECTRICIANS SHOULD PROVIDE
ALL INSTALLATION SERVICES.
• TO AVOID ELECTRIC SHOCK OR COMPONENT DAMAGE DISCONNECT POWER BEFORE ATTEMPTING
INSTALLATION OR SERVICING.
• THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE NATIONAL ELECTRIC CODE (NEC) AND ALL
APPLICABLE FEDERAL, STATE AND LOCAL ELECTRIC CODES AND SAFETY STANDARDS.
• USE ONLY UL (OR OTHER NTRL) APPROVED WIRE FOR INPUT/OUTPUT CONNECTIONS. MINIMUM SIZE 18 AWG
OR 14 AWG FOR CONTINUOUS RUNS.
• DO NOT INSTALL IN A HAZARDOUS ATMOSPHERE, EXCEPT WHERE THE AMBIENT TEMPERATURE DOES NOT
EXCEED THE RATED OPERATING TEMPERATURE OF THE FIXTURE.
• USE CAUTION WHEN HANDLING THIS PRODUCT DURING OR AFTER OPERATION AS IT MAY BECOME HOT AND
CAUSE BURNS. DISCONNECT PRODUCT AND ALLOW COOLING PRIOR TO SERVICING.
• ANY ALTERATION OR MODIFICATION OF THIS PRODUCT IS EXPRESSLY FORBIDDEN AS IT MAY CAUSE
SERIOUS PERSONAL INJURY, DEATH, PROPERTY DAMAGE AND/OR PRODUCT MALFUNCTION.
• TO PREVENT PRODUCT MALFUNCTION AND / OR ELECTRICAL SHOCK THIS PRODUCT MUST BE PROPERLY
GROUNDED.
• CAUTION - RISK OF FIRE
• THIS LUMINAIRE IS DESIGNED TO OPERATE IN AMBIENT TEMPERATURES RANGING FROM -4°F TO +122°F
(-20°C TO +50°C).
4270075
WARNING

Publicité

loading

Sommaire des Matières pour Ledvance CANOPY

  • Page 1 PERFORMANCE CLASS DUAL SELECTABLE CANOPY Featuring the innovative Dual Optics design, this product offers both Garage and Canopy optics without the need for any lens changes or switches. Additionally, it features Dual Selectable options for CCT and wattage, providing flexibility to meet your specific requirements.
  • Page 2 Safety Precautions: IMPORTANT: READ CAREFULLY BEFORE INSTALLING THE FIXTURE. RETAIN FOR FUTURE REFERENCE. GENERAL: Upon receipt of the fixture, thoroughly inspect for any freight damage which should be brought to the attention of the delivery carrier. Trouble Shooting Checklist Check your power source. •...
  • Page 3 Installation: Surface Mounting 3. Use a screwdriver to open the knockout that covers the 1. Use a screwdriver to unscrew the limiting screw on the wattage and CCT switches. side of the luminaire. 4. Select the desired CCT and wattage. 2.
  • Page 4 Installation: Pendant Mounting 3. Use a screwdriver to open the knockout that covers the 1. Use a screwdriver to unscrew the limiting screw on the wattage and CCT switches. side of the luminaire. 4. Select the desired CCT and wattage. 2.
  • Page 5 Wiring Diagram: Complete Wiring Diagram (for reference): 4270075...
  • Page 6 LEDVANCE CANOPY Directives d’installation LUMINAIRE DE MARQUISE À DOUBLE SÉLECTION DE CLASSE PERFORMANCE Offrant un concept à double optique innovateur, ce produit procure une optique autant pour le garage que pour la marquise sans avoir à changer la lentille ou l’interrupteur. De plus, pour fournir la polyvalence répondant à...
  • Page 7 Mesures de sécurité : IMPORTANT : VEUILLEZ LIRE ATTENTIVEMENT LES DIRECTIVES D’INSTALLATION AVANT DE DÉBUTER L’INSTALLATION DE CE LUMINAIRE. GARDER CES DIRECTIVES POUR RÉFÉRENCE FUTURE. GÉNÉRAL : Lors de la réception de l'appareil, vérifiez soigneusement qu'il n'y a pas de dommages causés durant le transport et si des dommages sont constatés aviser le transporteur.
  • Page 8 Installation : montage en surface Interrupteur DIP de puissance et TCP 3. Utiliser un tournevis pour ouvrir l’entrée défonçable qui 1. À l’aide d’un tournevis, dévisser la vis de limitation sur recouvre les interrupteurs de puissance et TCP. le côté du luminaire. 4.
  • Page 9 Installation : montage suspendu Interrupteur DIP de puissance et TCP 3. Utiliser un tournevis pour ouvrir l’entrée défonçable qui 1. À l’aide d’un tournevis, dévisser la vis de limitation sur recouvre les interrupteurs de puissance et TCP. le côté du luminaire. 4.
  • Page 10 Schéma de câblage : 4270075...

Ce manuel est également adapté pour:

Garage