Publicité
EN
1_ INSTALLATION 76-105cm
1.1_ ISOFIX + Top Tether + Harness
1. Connect the ISOFIX guider to the fixture.
2. Extend the ISOFIX connectors on both sides to their longest position.
3. Hold the baby car seat and connect the ISOFIX connectors to the
fixture.
4. Ensure the connectors are locked by listening for a "click" sound.
5. Verify that the indicator turns green and that both ISOFIX connectors
are set to the same gear number. If the indicator is not green, restart
the connection process.
6. Push the baby car seat firmly against the backrest of the vehicle
seat.
7. Pull the baby car seat gently to confirm the ISOFIX connectors are
securely locked.
8. Press the button to release the "Top tether" strap.
9. Securely attach the "Top tether" hook to the anchorage fitting.
34
10. Check that the indicators on the tether strap adjuster are fully
green. If the indicator is red, reinstall the tether correctly.
11. Ensure the baby car seat is firmly installed and does not move
excessively.
12. Press the harness adjustment button.
13. Fully extend the shoulder harnesses of the child restraint.
14. Press the red button to disengage the buckle.
15. Move the harness straps to both sides.
16. Adjust the headrest to the proper height for your child.
17. Engage the buckle securely.
18. Pull the adjustment strap to tighten the harness to the proper
length, ensuring your child is snugly secured.
Confirm there is approximately one hand's thickness of space between
the child and the shoulder harness.
Publicité
