Télécharger Imprimer la page

Publicité

Liens rapides

G-10 PLATINES | BOIS
Enrouleur de couverture pour
piscine octogonale en bois
NOTICE DE MONTAGE
(à lire attentivement et à conserver pour utilisation ultérieure)
BWT myPOOL
2019/05 - Indice de révision : B - Code : 32054
FR | PAGE 1 - EN | PAGE 7
1/1

Publicité

loading

Sommaire des Matières pour BWT G-10

  • Page 1 G-10 PLATINES | BOIS Enrouleur de couverture pour piscine octogonale en bois NOTICE DE MONTAGE (à lire attentivement et à conserver pour utilisation ultérieure) FR | PAGE 1 - EN | PAGE 7 2019/05 - Indice de révision : B - Code : 32054...
  • Page 2 Lardon de blocage Vis CBL ZST 3.5x13 inox pour lardon Vis 5.5 x 15.9 Vis FZ ST 3.5x16 inox pour lardon Sandow Ecrou inox frein M6 2/12 2019/05 - Indice de révision : B - Code : 32054 BWT myPOOL...
  • Page 3 (19). Fixer les embouts d’axe (4) et les pieds (3) Mettre en place le volant (5) et la bague de blocage (17) 3/12 2019/05 - Indice de révision : B - Code : 32054 BWT myPOOL...
  • Page 4 Frapper au marteau Centrer l’oeillet Partie femelle dans l’ourlet de la de l’oeillet sur la couverture. couverture Partie mâle de l’oeillet sous la couverture 4/12 2019/05 - Indice de révision : B - Code : 32054 BWT myPOOL...
  • Page 5 Fixer les sandows sur l’axe Rabattre les pans latéraux de la couverture avant de l’enrouler. 5/12 2019/05 - Indice de révision : B - Code : 32054 BWT myPOOL...
  • Page 6 6/12 2019/05 - Indice de révision : B - Code : 32054 BWT myPOOL...
  • Page 7 G-10 SCREW FLANGES | WOOD Cover roller for wooden octagonal swimming pool structure INSTALLATION INSTRUCTIONS (Please read carefully and keep for future reference) 7/12 2019/05 - Indice de révision : B - Code : 32054 BWT myPOOL...
  • Page 8 Self-tapping large round button head pozi 3.5x13 stainless steel screw for lug 5.5 x 15.9 screw Self tapping cross head pozi 3.5x16 stainless steel screw for Bungee strap M6 stainless steel locknut 8/12 2019/05 - Indice de révision : B - Code : 32054 BWT myPOOL...
  • Page 9 Centre the middle tube (1) on the two axles (2). Insert the lugs (18) in the grooves on each side and tighten the screws (19). Mount the axle end pieces (4) and the end stands (3) Mount the flywheel (5) and the locking ring (17) 9/12 2019/05 - Indice de révision : B - Code : 32054 BWT myPOOL...
  • Page 10 Male part of the eyelet underneath the cover Fasten the bungee straps to the axle 10/12 2019/05 - Indice de révision : B - Code : 32054 BWT myPOOL...
  • Page 11 Fold down the side flaps of the cover before rolling it up 11/12 2019/05 - Indice de révision : B - Code : 32054 BWT myPOOL...
  • Page 12 12/12 2019/05 - Indice de révision : B - Code : 32054 BWT myPOOL...