BWT G-10 Notice De Montage page 10

1.4 Centre the cover roller across the pool width
1.5 Attach the bungee straps to the cover
INSERT THE EYELETS: If the cover has not been fitted with eyelets, create a 15 mm hole in the cover
and insert the eyelet.
Hit with a hammer
Centre the eyelet in
the hem of the cover
1.6 Fasten the bungee straps to the axle
6
10/12
2019/05 - Indice de révision : B - Code : 32054
Female part of the
eyelet on top of the
cover
Male part of the
eyelet underneath
the cover
7
13 cm
BWT myPOOL