Adjusting The Distance Of The Joint Supports - Albrecht Cds Manuel D'utilisation

User Instructions

2.2.4. Adjusting the distance of the joint supports

You can change the distance of the hinges from the edge of the sole.
1 Remove the sole.
2 Loosen the screws in the sole plate.
3
Move the rods.
4 When the optimal position for both hinges is found, tighten the screws again.
Size L/L, L/M, L/S
1 1
4 4
2 2 3 3
www.albrechtgmbh.com 49