Publicité
NOTE :
•
Before washing, please make sure the washing machine is installed properly.
•
Your appliance is thoroughly checked before it leaves the factory. To remove
any residual water and to neutralize potential odors, it is recommended
to clean your appliance before first use. For this reason, start the Cotton
program at 90°C without laundry and detergent.
1. Turn on the tap.
5. Select a programme by turning the programme selector.
92
FP6120DWH IB 23 May.indd 92
FP6120DWH IB 23 May.indd 92
WASHING
2. Plug in the appliance.
3. Sort the laundry and put it into the drum.
Do not get laundry caught in the door. It can
cause damage to the door seal.
Do not put too much laundry into the drum. It
can cause excessive vibration or damage to the
appliance.
4. Add the detergent according to the amount of
laundry, degree of soiling, water hardness and
manufacturer's instructions.
Pour liquid detergent into the appropriate
dispenser drawer and push in the appliance.
23/5/2023 3:56 PM
23/5/2023 3:56 PM
Publicité
