Publicité
Assembly Guide
Step 2:
Insert the hexagonal rod into the leg,
then use 2 M4×35 screws to secure the motor to the leg.
Accessories and Tools:
R-2.5mm hex wrench
Hexagonal Rod
G
L-M4×35 screws x2
B
Step 4:
Use 12 M6×12 screws with washers to secure the
crossbeam to the legs.
E
B
Step 5:
Use 8 M6×40 screws to secure the foot to the lifting leg.
N
D
3
Step 3:
Next, insert the other end of the hexagonal rod
into the opposite leg.
Hexagonal Rod
G
B
Accessories and Tools:
4mm hex wrench
C
M
M-M6×12 screws
with washers x12
E
Accessories and Tools:
D
S-4mm hex wrench
N-M6×40 screws x8
Assembly Guide
Step 6:
Use 4 M6×12 screws with washers to secure the bracket to the leg.
C
Step 7:
Then, install 8 silicone pads onto the bracket.
Step 8:
Use 8 M6×14 screws to secure the table frame to the tabletop.
(To prevent scratching the desktop,
place soft items such as a carpet on the floor before installation,
and assemble the desktop with the reverse side facing up.)
P
M
T
F
P
Accessories and Tools:
S-4mm hex wrench
M-M6×12screws
with washers x4
Accessories and Tools:
T-Silicone Pads x8
Accessories and Tools:
P-M6×14 screws x8
S-4mm hex wrench
4
Publicité
