Cleaning, Maintenance And Storage - Withings Body Comp Guide Utilisateur

Cleaning, Maintenance and Storage

Cleaning and maintenance the Withings Body Comp
- It is recommended to clean the glass plate of the scale before
each measurement.
- Use only a cloth dampened with warm water to clean your scale.
The use of any detergents or cleaners may cause irreversible
damage to the conductive coating on top of the glass plate.
- Do not use the device while doing cleaning and maintenance
operations.
Storage
- Store the device in a clean and safe location between use.
- If storage conditions are different from the operating
conditions indicated in the technical specifications,
wait 30 minutes before taking a measurement.
Safety and performance
RF Statement
Medical electrical equipment needs special precautions regarding
EMC and needs to be installed and put into service according to
the EMC information provided in the accompanying documents.
Portable and mobile RF communications equipment can affect
medical electrical equipment.
Guidance and manufacturer's declaration-electromagnetic emissions
Withings Body Comp is intended for use in the electromagnetic environment specified below.
The customer or the user of the Withings Body Comp should ensure that it is used
in such an environment.
Emissions Test Compliance
CE emissions CISPR11 Group 1
RE emissions CISPR11 Class B
Harmonic emissions N/A
IEC 61000-3-2
Voltage fluctuations/Flicker N/A
emissions IEC 61000-3-3
Electromagnetic environment – guidance
Withings Body Comp uses RF energy only for
its internal function. Therefore, its RF emissions
are very low and are not likely to cause any
interference in nearby electronic equipment.
Withings Body Comp is suitable for use in all
establishments, including domestic establish-
ments and those directly connected to the
public low-voltage power supply network that
supplies buildings used for domestic purposes.
7
EN-US
EN
FR
DE
SV
NL
FI
DA
IT
ES
CS
PL
PT
RO
HU
SK