Axis P1204 Guide D'installation page 17

AXIS P12 Series Installation Guide
3. Drill a hole through the wall or remove one of the punch-outs in the cover.
4. Fasten the plate to the wall using screws and plugs appropriate for the wall material. Ensure
that the camera bracket is pointing towards the area to be monitored. If routing the cable
through the wall, align the cut-out in the plate with the hole in the wall.
5. Place the ball in the socket and fasten the bracket with the screws. Aim the camera away from
the wall before tightening the screws. Position the camera so that the flat surface on the
thread is vertical or horizontal.
6. Route the cable through the wall, or through the punch-out in the cover.
7. Attach the cover.
8. Proceed to Connect the cables, on page 18.
All manuals and user guides at all-guides.com
Page 17