Axis P1204 Guide D'installation page 14

Page 14
Covert Installation
1. Drill a hole with 3mm diameter in the wall or ceiling. If the material is thicker than 1mm it may
be necessary to expand the hole with a countersink cutter.
2. Pull off the protection on the adhesive and attach the straight mounting bracket to the wall.
3. Insert the camera into the bracket, and fasten with the stop screw. Ensure that the cone of the
camera is flush with the wall.
4. Proceed to Connect the cables, on page 18.
All manuals and user guides at all-guides.com
AXIS P12 Series Installation Guide