Publicité
Assembly Instructions for Model: JFA36
Thank you for choosing the Java Furniture line from Sanus Systems.
Safety Warning: If you do not understand these directions, or have any doubts about the safety of the installation, please call a
qualified contractor or contact Sanus at 800.359.5520 or www.sanus.com. Check carefully to make sure that there are no missing
or defective parts. Our customer service representatives can quickly assist you with installation questions and missing or damaged
parts. Replacement parts for products purchased through authorized dealers will be shipped directly to you. Never use defective parts.
Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified by
Sanus Systems. Sanus Systems can not be liable for damage or injury caused by incorrect mounting, incorrect assembly, or incorrect use.
Please call Sanus Systems before returning products to the point of purchase.
Required Tools: Phillips screw driver, hammer or mallet (optional)
Supplied Parts and Hardware: Some parts not shown as actual size*
(14) Cam Pin - b
(18) Dowel - c
(14) Cam - a
(8) M6 Bolt - d
(8) Rubber Spacer - e
(8) Aluminum Spacer - f
(4) Base Bolt - g
(8) Carpet Glide - h
(16) Back Panel Screw - i
(1) Allen Key - j*
(12) Shelf Pin - k
(12) Shelf Pin Screw - l
(1) Door Latch - m
(4) Latch Screw - n
Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 USA
Customer Service: 800.359.5520. See complementary Sanus products at www.sanus.com
Publicité
