VEVOR VV42 Mode D'emploi page 8

STEP 5:
Place first chair hook on crossbar (c2). Align hooks hole with crossbar (c2)
hole. Insert crossbar retaining screw T4 (1 for each). Tighten screw with
nut cap using metal key. Repeat for all the other 5 hooks.
Fix 2 knobs(g) on both sides of each hanger (f) as shown in figure.
STEP 6:
Finally attach the 2 handles on both sides of the cart on the vertical bars (b)
and tighten it with 2 screws (T0) for each handle(h).
- 7 -