Hansgrohe Raindance 27160 1 Série Instructions De Montage / Mode D'emploi / Garantie page 8

1
2
3
8
English
Installation
Wrap the threads on the ½" side of the s-union with
Teflon tape. Screw the s-unions into the female
fittings.
The end of the s-union should extend 1⅜" outside the
surface of the finished wall.
Make sure that the s-unions are level.
Seal the wall around the female fit-
tings using waterproof sealant.
Failure to seal the wall may lead to
water damage.