Setting The Clock - Teac Dc-D6800 Manuel Du Propriétaire

Setting the Clock

UP/DOWN
1
Press the SET button in the standby
mode(time display mode).
The time display becomes active, and "hour" blinks.
< If the unit is on, press the POWER switch to turn it
off.
< If demonstration is displayed, press the BBS
button to stop it.
2
Press the UP or DOWN button to set
the current hour.
22
SET
UP/DOWN
3
Press the SET button.
4
Press the UP or DOWN button to set
the current minute.
5
Press the SET button.
The clock starts from 00 second.
If you made a mistake, press the CLEAR button.
You can go back to the previous step. If you press
CLEAR button in step
operation is canceled.
, the clock setting
1