Turning On And Off - Signia Pure 312 Ax Guide De L'utilisateur

To assure comfortable and easy use of your hearing
instruments they are equipped with an onboard control
element. In addition we offer an app for Android as well
as iPhones which makes handling your devices even
easier. Contact your Hearing Care Professional for
downloading and installing the smartphone app.
You can turn your hearing instruments on or off via the
battery compartment:
Turning on: Close the battery compartment.
X
The default volume and hearing program are set.
Turning off: Open the battery compartment to the first
X
catch.
When wearing the hearing instruments, an alert tone can
indicate when an instrument is being turned on or off.
When the
instruments turn on after a delay of several seconds.
During this time you can insert the hearing instruments
into your ears without experiencing unpleasant feedback
whistling.
The "power-on delay" can be activated by your Hearing
Care Professional.
14
is activated, the hearing
You have following options to switch your device into
standby mode:
●
via remote control or smartphone app
●
via rocker switch.
Turning on or off:
Press and hold the rocker switch for several seconds.
Refer to section "Controls" for the settings of the
rocker switch.
Standby mode mutes the device. When you leave
standby mode, the
program are set.
Note:
●
In standby mode, the device is not turned off
completely. It draws some power. Therefore, we
recommend to use standby mode only for a short
period of time.
●
If you want to leave standby mode, but the remote
control or app is not at hand, turn your device off
and on again (by opening and closing the battery
compartment). In this case, the default volume and
hearing program are set.
used volume and hearing
15