Hach SC4500 Manuel D'utilisation Simplifié page 23

Icon Description
Push to show the Main menu.
Claros connection
WiFi connection. Shows when a USB
box with a WiFi adapter is connected
to the controller.
Screen lock. Shows when the screen
is locked.
screen.
When in a sub menu, push to go to
the main screen.
Push a measurement window to show the device detail screen. Refer to
Figure 14 Device screen
1 Device name
Section 6 Startup
Connect the power cord to an electrical outlet with protective earth ground or set the circuit breaker
for the controller to on.
6.1 Enter initial settings
At initial startup, follow the prompts on the display to set up the language, the date, the time and
network information. Refer to the expanded user manual on the manufacturer's website for
instructions.
Section 7 Operation
7.1 Configure the controller settings
Set the controller language, time, date, facility, location and display options.
13
The Screen lock option is enabled by default.
Table 5 Icon descriptions
13
Swipe up to unlock the
Icon Description
3G/4G signal strength. Shows when a
USB box with a cellular modem is
connected to the controller.
USB connection. Shows when a USB
flash drive is connected to the
controller. Blinks when there is data
transmission.
Remote user. Shows when a remote
user is connected to the controller.
Push to enter a submenu or go back
to the previous menu.
Figure 14.
English 23