Features - Sony PC-3000 Mode D'emploi

Features

Various system constructions
Eight pictures can be selected to send to a monitor or a projector
This unit can send the signal to up to eight pieces of equipment
The input source of the projector can be selected
Built-in cable compensating circuit
You can construct a system with a projector by using up to eight PC-
3000s, as PC-3000 is conformed to RS-485 system.
This unit can mount up to eight signal interface boards which allow the
connection of up to eight VCRs or personal computers with this unit. The
picture from connected equipment can be selected with the SELECT
button on the front panel.
VCR Betacam
PC-3000
Monitor
The signal from the equipment connected to the switcher can be distributed
to up to eight pieces of equipment.
VCR Betacam
PC-3000
Monitor
With the buttons on the front panel of this unit, the input signal of the
projector can be switched.
You can reduce deterioration in picture resolution caused by using a long
cable through application of the compensating circuit incorporated into this
unit. Activate the built-in compensating circuit with the MODE selector
set according to the length or type of the cable being used to connect this
unit and a projector or monitor.
Personal computer
Projector
Personal computer
Projector
5
(EN)