Standby Mode; Displaying Number Of Brews; Reset Function - Gaggenau CM 210 Notice D'utilisation Et D'entretien

Standby mode

Displaying number
of brews

RESET function

24
De-activating the setting:
̨
Set the time to --:-- with r
Note: The current time must be set for this function to
run.
The switch-on time is retained even if there is
a power failure or the main power switch 1 is
turned off.
This function is used to specify after how many hours
following the last brew the appliance automatically
switches to standby mode.
̨
Hold down button P on display for at least
3 seconds.
̨
Select OFF IN
̨
Press button q , hours display flashes.
̨
Change the setting with r or s .
̨
Press button q to save the setting.
̨
Press the o
The switch-off time is retained even if there is
a power failure or the power switch 1 is
actuated.
The number of brewed espressos, coffees and preground
coffees is displayed here. The number of brews are
counted automatically.
̨
Hold down button P on display for at least
3 seconds.
̨
Select n0.BREwS
̨
Press the o
This number cannot be changed!
Possible from "standby" mode only
̨
Simultaneously hold down r and s for at least
3 seconds – all saved settings are deleted.
The display indicates the messages in the
German language after the RESET function.
or s .
with r or s .
button. Back to standby.
with r or s .
button. Back to standby.