Connecting The Drain Hose - essentiel b ELS814-1b Notice D'utilisation

• Water pressure between 0.1 and 1 MPa allows for optimum operating efficiency
(pressure of 0.1 MPa corresponds to more than 8 litres of water flowing per minute
with a fully open tap).
• Make sure that the hose is not pinched, twisted, bent or crushed.
NOTE: The appliance must be connected to the water supply system using the
new connector assemblies supplied with the appliance; used connector assemblies
must not be reused.

Connecting the drain hose

• Connect the drain hose to a drain pipe or to the outlet elbow of a sink using
additional equipment. Position the hose between 0 and 80 cm above the ground.
• Never attempt to extend the drain hose.
• Do not place the end of the machine's drain hose in a container, bucket or tub.
• Ensure that the drain hose is not bent, twisted, crushed or overstretched.
73