Publicité
Les langues disponibles
Les langues disponibles
Instructions for using
Working Method
It is recommended to use No. 36 or No. 46 anti-wear hydraulic oil, or
other non-foaming oil with good oxidation resistance, corrosion resis-
tance and lubricating performance. Please ensure the cleaness and
change regularly.
Working Temperature
The oil temperature range is -20'C to 80'C; the ambient temperature
must not be lower than -10℃; avoid low temperature starting.
Installation & Use
When installs the pump need to pay attention to the rotation and
inlet/outlet port, Reverse rotation of gear pump is strictly prohibited.The
product must be kept fixed and not used under shaking.
When the product is assembled to the system for the first time, it should
continue to inject oil and exhaust into the pump, and stop after the oil
infiltrates the entire system to prevent the phenomenon of cavitation.
When the pump is running for the first time, check whether the product
has any abnormal phenomena such as leakage, excessive heating,
noise, etc, if any abnormality occurs, please shut down the equipment
immediately and contact the sales company.
Product Warranty
Product warranty for this pump is 1 year. Problems caused by personal
disassembly are not covered by the warranty and the product warranty
terms are suspended.
-2-
Publicité
