Transport - Worx Wr142E Mode D'emploi

NOTE:
1. Your battery pack is UNCHARGED. To ensure full capacity of the battery, completely charge
the battery in the battery charger before using your power tool for the first time.
2. A battery pack will slowly lose its charge when kept out of the charger or left in an unplugged
charger for a long time. It may need to be recharged before use.
The Li-Ion battery is protected against deep discharging. When the battery is empty, the machine
is switched off by means of a protective circuit: The tool no longer rotates. In a warm environment
or after heavy use, the battery pack may become too hot to permit charging. Allow time for the
battery to cool down before recharging. The Li-Ion battery can be charged at any time without
reducing its service life. Interrupting the charging procedure does not damage the battery.
How to charge the battery
Refer to the instruction manual provided with product or charger.
WARNING: Do not continue to press the On/Off Switch after the
machine has been automatically switched off. The battery could be over-discharged.
Store the battery only within a temperature range between 0
leave the battery in the car in summer time.
A significantly reduced working period after charging indicates that the battery is used and must
be replaced.

TRANSPORT

The contained Li-Ion batteries are subject to the dangerous goods legislation requirements.
Dispatch batteries only when the battery housing is undamaged. Pack up the batteries in such
C and 45 C. As an example, do not
o o
EN
5