Publicité
7 7
Take (1) one supplied U-Clip and install in the slot
of the MudFlap at the inner fender. Place it so it
clamps around the MudFlap and backside of the
fender. Then, use a flat screwdriver to push it onto
the MudFlap and fender.
9
9
Install the passenger side MudFlap marked "RH,"
with the wheels turned fully to the right repeating
Steps 3-8.
WARNING:
The MudFlap is designed to fit vehicles with standard sized wheels and tires. Installation of MudFlaps on vehicles with aftermarket
wheels or oversized tires may interfere with the MudFlap, will void the warranty and may damage the MudFlap or the vehicle.
(630) 769-1500
weathertech.com/warranty
8
8
While firmly pressing the MudFlap up to the fender,
fully tighten the (3) three factory Phillips head
screws.
10 10
Congratulations!
Your new WeatherTech®
No-Drill MudFlaps have been installed! Lifetime
Limited Warranty against defects in materials and
workmanship when installed correctly
.
Publicité
