Publicité
Les langues disponibles
Les langues disponibles
(1)
(5)
(6)
6. Mounting chair-suspension runners
Uno-M-Step 22405-22413
UnoBean-Step 01468
Turn the table top over and lay on a clean assembly surface
(e.g. protective cover, etc.).
-
LIGNOdur 22405, 22408, 22409, 22411
Position the chair-suspension runners
drilled holes in the table top (distance
side
is 50 mm). Here the folded edges
(4)
runner pairs always point outwards. The size of the seat
shell can be adjusted via the elongated holes in the
chair-suspension runners (outwards < --- > large seat
shell
(6)
/inwards >---< small seat shell
each chair-suspension runner with three M6x12 mm
slotted pan-head screws.
14
All manuals and user guides at all-guides.com
(8)
(5)
(4)
(2)
(7)
-
(1)
over the pre-
(2)
from the user
of the
(5)
(7)
). Screw on
(1)
(5)
(6)
LIGNOdur 22406, 22407, 22410, 22412, 22413,
01468
Position the chair-suspension runners
signated sleeves in the table top (distance
user side
(4)
is 50 mm or 76/85 mm for model 01468).
Here the folded edges
of the runner pairs always
(5)
point outwards. The size of the seat shell can be adjusted
via the elongated holes in the chair-suspension runners
(outwards < --- > large seat shell
small seat shell
). Screw on each chair-suspension
(7)
runner with three M6x15 mm slotted pan-head screws.
Caution! In conjunction with the chair suspension do
not mount a top support
(8)
22409 (one-seater).
(5)
(2)
(4)
(7)
over the de-
(1)
(2)
from the
(6)
/inwards >---<
on the models 22408 and
Publicité
