VS Uno-M-Step Instructions De Montage page 10

LIGNOdur
(6)
(5)
2. Screw on the table frame
LIGNOdur
Uno-M-Step 22405, 22408, 22409, 22411
- LIGNOdur one-seater 22408
Place the table frame (1)
top . Align it against the two rows of holes. The
(2)
front left fixing position
side (4) (-> off-centre). On each side, use the two
countersunk-head screws ø 6.3x15.5 mm to screw on
at the outside positions
- LIGNOdur one-seater 22409
Place the table frame (1)
top (2) . Align it against the two rows of holes. The front
left fixing position is 140 mm from the user side
(3)
On each side, use the two countersunk-head screws
ø 6.3x15.5 mm to screw on at the outside positions
10
All manuals and user guides at all-guides.com
(1)
(7)
(2)
(3)
on the bottom of the table
is 130 mm from the user
(3)
.
(6)
on the bottom of the table
LIGNOdur
(4)
- LIGNOdur two-seater 22405
Position the table top support
user side . Place the table frame
(4)
of the table top
holes. The front left fixing position
the user side
(4)
two countersunk-head screws ø 6.3x15.5 mm to screw
on at the outside positions
support (7) using a fillister-head screw M6x70 mm.
- LIGNOdur two-seater 22411
Place the table frame
top (2) . Align it against the two rows of holes. The
front left fixing position
. side (-> off-centre). On each side and in the middle,
(4) (4)
use the two countersunk-head screws ø 6.3x15.5 mm
(6) . to screw on at the outside positions
(6)
(5)
Model 22411
260 mm from the
(7)
on the bottom
(1)
(3) . Align it against the two rows of
(3) is 130 mm from
(-> off-centre). On each side, use the
(6) . Screw on the table top
on the bottom of the table
(1)
(3) is 130 mm from the user
(6) .