Nosiboo GO Manuel D'utilisation page 17

DON'T!
6. Cleaning
1. Remove the Penguin head from the
device housing, remove the nose
tip, then open the Penguin head.
2. Wash the nose tip, and the Penguin
head in lukewarm water and
dishwashing detergent and let
them dry.
3. Use the brush to clean the nose tip.
4. Clean the device housing with
a dry, soft cloth; do not use any
liquids, detergents or chemicals.
DO!
Do not turn the device upside down mean-
while use.
Do not use the device without the air mesh.
Do not use more than 5 ml of saline solution.
Excess solution will exit through the vents on
the back of the device.
Switch off the device when assembling,
disassembling and cleaning the Penguin
head.
!
CAUTION
!
WARNING
17