Publicité
Les langues disponibles
Les langues disponibles
Install digging bucket
1. Put the connecting rod through the hole "R" on the digging bucket to "L",
then put the bottom of the digging bucket facing upwards, the "L" side aligned
with the "L" hole of the bucket arm and insert it firmly to the end, and finally
secure it with 1pc of 4*12 flat head screw.
2. The other side of the bucket arm is also secured with 1pc of 4*12 screw.
14
Install bucket arm
1. With the digging bucket facing upwards, connect the left bucket arm with
wire to the body fixing plug.
2. Align the bucket arm with the body fixing hole and insert it hard to the end,
and fix it with 3pcs of M5*30 machine screws on each side.
Charging steps are as follows
Step1: The charging hole is under the seat.
Step2: Put the charger plug into the plug hole.
Step3: Connect the charger to the power socket.
Warning: Car must be charged by adults only. Car is useless during charging.
15
Publicité
