cecotec PrecisionCare OneShave Screen Manuel D'instructions page 15

- WARNING: remove the charger cable
before cleaning the device and hold it
tightly so it does not fall into water.
- The appliance must be powered at a low
safety voltage as stated on the marking.
- The device may only be used with the
power supply unit provided with the
appliance.
- Check the power cable regularly for
visible damage. If the power cable is
damaged, it must be replaced with a
special cable or set to be supplied by the
official Cecotec Technical Support Service
or the corresponding after-sales service
to avoid any danger.
- The charge and storage temperature of
the product must be between 5 ºC and 35
ºC.
- This appliance is designed for domestic
use only and is not intended for bars,
PRECISIONCARE ONESHAVE SCREEN
15