cecotec PrecisionCare OneShave Screen Manuel D'instructions page 105

- Never use detergents or solvents to clean the appliance.
- After use, clean the appliance with the brush provided to
remove hairs from the blades.
- To ensure the long-term performance of the appliance, it is
recommended to clean and lubricate it frequently.
- Use the cleaning brush provided to remove hairs from the
blades. Then, apply 2 or 3 drops of oil and run the appliance
for a few seconds.
5. TROUBLESHOOTING
Problem Possible cause
The shaver 1. Battery is
does not discharged.
switch on
2. Shaver not
connected
correctly.
3. Power button
defective.
Possible solution
1. Charge the shaver for
the recommended time.
2. Make sure that the cable
is properly connected.
3. Check the button and
contact the official
Cecotec Technical
Support Service.
PRECISIONCARE ONESHAVE SCREEN
ENGLISH
105