Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
sigfox TEMP- Guide utilisateur / User guide version V1.2.0
3.
DEVICE CONFIGURATION
The device can be configured using the USB connector. This connection allows you to communicate with the device via a virtual com port and to
transmit AT commands in order to modify the parameters of the device.
3.1. Connecting the device to a computer
Connect the product to the USB input of a computer. The product has a Type B micro USB connector.
During connection, the device must be recognised by the computer as a Virtual Com Port (VCP) device.
Using Windows: Verification that the device has been recognised to be functioning properly can be obtained by consulting the device manager.
You should see the USB series device with a corresponding COM port number appear during connection.
If you are not able to see a device of this type, you must install the USB driver for this device, available to download from our website:
http://www.adeunis-rf.com/en/products/sigfox-ready-products/sigfox-temp
Select:
•
Driver USB-STM32_x64, si votre ordinateur est un système 64 bits
•
Driver USB-STM32, si votre ordinateur est un système 32 bits
EN
Page
53
of 72
Publicité
Table des Matières
