Publicité
Parameter settings
Hold both buttons
the settings menu.
P01 is for the speed unit, with 0 for km/h and 1 for mph. The default is
km/h (code 0).
P02 is for the screen brightness, ranging from level 1 to level 3. The
default is 2.
To switch between the settings elements, press the button.
To change a parameter value, press the button
Once the settings are complete, hold both buttons
screen will restart. The settings will expire after fourteen seconds of
inactivity.
Attention
Battery and Charging
Do not connect the positive to the negative, or vice versa. Do not
damage, disassemble, or short-circuit the battery. Avoid water, other
liquids, or any foreign matter inside the battery to prevent short
circuits.
You must follow the instructions in this manual when charging the
battery; otherwise, the owner will be solely responsible for any
consequences.
Charge the battery only at temperatures between 0°C (or 32°F) and
45°C (or 113°F), and discharge at temperatures between -20°C (or
-4°F) and 60°C (or 140°F). The charging current should not exceed 2A.
Cargue únicamente en un área bien ventilada, alejada del sol y el
calor.
Use the original charger from the package to charge the battery.
Connect the charger to the battery before plugging it into the power
outlet. Do not charge the battery for more than 6 hours each time.
If during charging the charging indicator appears abnormal, a smell is
released, or the charger overheats, stop charging immediately. Have
the charger checked or replaced.
simultaneously for eight seconds to open
or
the button.
to exit. The
EN
15
Publicité
