Publicité
EN
Considerations
1. Assembly: Open the box and take out your eBike. Unfold the frame and
tighten the lock on the battery tube. Straighten the stem and adjust the lock.
Unfold and align the handlebars, then lock the quick release. Gently pull the
brake levers a couple of times to ensure the front and rear brakes are
working properly. Walk with the eBike to ensure there are no abnormal
sounds in the wheels when turning. Adjust the seat post to the desired
height and lock the quick release. Install the pedals and tighten them well.
2. Charging: Connect the DC connector of the charger to the charging port
of your eBike and the AC plug to the power outlet. The charger light turns
from red to green when charging is complete.
3. Turning on and off: Hold the power button below the screen for three
seconds to turn the eBike on or off. The eBike will turn off automatically after
ten minutes of inactivity.
4. Turning on and off the light: Hold the + button on the screen for three
seconds to turn both the front headlight and the rear light on or off.
5. Changing gears (motor speed): Press the + and – buttons to change
gears. Gear 0/1 corresponds to the maximum speed driven by the motor, 0
km/h (or 0 mph) and 25 km/h (or 15.53 mph). The default gear when turning
on the eBike is 0.
6. Battery indicator: The screen shows five battery levels, with each bar
representing 20%. When the battery level drops below 10%, the last bar will
blink to remind the owner to charge it.
7. Front headlight and rear light: Press the button below the screen and
hold it for three seconds to turn the front headlight on or off. The rear light
turns on and off together with the front headlight in Night Riding Mode. In
Braking Mode, the rear light blinks when braking.
8. Removing and installing the battery: This battery is removable. Release
the lock on the frame, fold the frame, and open the battery lock to remove it.
To install the battery, slide it into the battery tube, unfold the frame, and
tighten the lock. (For battery replacement in case of damage, please
contact our official customer service).
12
Publicité
