Publicité
Pedal installation
Charger
Please use the original charger that comes with the electric bike. Connect
the DC jack of the charger to the charging port of your bike, and then plug
the AC plug into the power outlet. When charging begins, the charger's red
light will turn on. The charger light will change from red to green when the
charge is complete. (When the battery does not need charging, do not keep
the AC plug connected to the power outlet, and do not leave the charger
connected to the battery. Do not charge indoors. When charging outdoors,
avoid rain or direct sunlight on the charger.)
Buttons
Power on and off
Hold the button
will automatically turn off after ten minutes of inactivity.
Shifting gears (motor speed)
Press the button
down a gear. There are two gears available: 0 and 1. The default gear is 0.
Turning the headlight on and off
Hold the button
Data display
Press the button
Distance, Total Distance, and Voltage. The default element displayed is
Trip Distance.
Screw the right pedal clockwise and the
left pedal counterclockwise.
for three seconds to turn the eBike on or off. The eBike
to shift up a gear, and press the button
for three seconds to turn the headlight on or off.
twice to switch between data elements, including Trip
EN
to shift
14
Publicité
