Publicité
Les langues disponibles
Les langues disponibles
1. Remove the screw (1) that fixes the upper
hinge cover (2) and remove the upper hinge
cover.
2. Remove the screws that hold the upper hinge
and remove the upper hinge.
3. Remove the upper hinge hole cover (4).
4. Lift the door and place it on a padded surface
to prevent it from being scratched.
5. Remove the screws (7) that hold the lower
hinge (8) and then remove the lower hinge.
6. Remove the foot (6). Then transfer and fix it
to the opposite side.
7. Remove the bolt-pin cap (9). Remove the
bolt-pin from the lower hinge and
reverse the lower hinge. Install the lower hinge
to the opposite side with the screws.
8. Install the bolt-pin to the lower hinge. Install
the bolt-pin cap to the bolt-pin.
9. Fit the door onto the lower hinge.
10. While holding the door in the closed position,
secure the upper hinge in the top frame with
screws.
11. Secure the upper hinge cover onto the upper hinge with the screw. Attach the upper hinge
hole cover to the top of the appliance.
4. USE INSTRUCTIONS
Temperature setting:
Adjust the internal temperature of your freezer using the thermostat
located at the bottom, at the back of your appliance. The thermostat
goes from the warmest "1", to the coldest "7". Adjust the temperature
according to your needs. Adjust the temperature as needed. "4"
seems appropriate for use at home or in the office (ambient
temperature 25°C). The appliance ensures that the temperature is
maintained as long as it is in operation and used under normal
conditions of use. The temperature inside the appliance can be
influenced by many factors: ambient temperature, exposure to
sunlight, number of door openings and quantity of food stored...
Slight changes in temperature are perfectly normal.
The first time you use your appliance, let it run empty for 4 hours before putting food in it so
that it has cooled sufficiently.
24
Publicité
