Parts List - Homcom 824-021 Mode D'emploi

PARTS LIST

1. Front Guard
2. Fan Blade
3. Screws
4. Rear Guard
5. Fan Blade Screw
6. Motor Shaft
7. Oscillation Knob
8. Speed Control
9. Fan Motor
10. Power Cord
11. Inner Tube
12. Height Adjustment Screw
13. Outer Tube
14. Base
15. Weight
16. Fastener
17. Locking Screw
ASSEMBLING THE FAN
1. Remove all the appliance parts from the packaging.
2. Place the outer tube (13) into the the base (14).
3. Fit the weight (15) onto the bottom of the base (14), and then the fastener (16) onto the bottom of
the weight (15). Tighten the fastener (16), weight (15), base (14) and outer tube (13) with the locking
screw (17).
4. Position the fan motor (9) on top of the inner tube (11) as shown in the picture below.
Insert tilt Axle so it passes through square hole of the coupling and lower hole of the Inner Tube (11).
Fully tighten the Tilt Axle with the Locking Nut.
5. Insert Tilt Locking Screw through the top hole of the coupling and firmly tighten.