Publicité
Les langues disponibles
Les langues disponibles
MANUAL FOR ECOSOFT PINK SOFTENERS
14
6. QUICK SET UP GUIDE
STEP 5S. If Step 4S is set to rES, set
Ionic Capacity using
If Step 4S is set to dELY or on 0, set
Volume Capacity. Volume Capacity
can be set to 0.02 m3 – 5700 m3 or
OFF.
Press «NEXT» to go to Step 6S. Press
«REGEN» to return to previous step.
STEP 6S. Set Fill Type to POST or PrE
using
or . Press «NEXT» to go to Step 7S.
Press «REGEN» to return to previous step.
STEP 7S. Set Regenerant Draw Typeto dn or UP
using
or . Press «NEXT» to go to Step 8S. Press «REGEN»
to return to previous step.
Note: The following displays can differ depending on
system type and fill type. See Control Valve Function and
Cycles of Operation for more detail.
STEP 8S. Set the length of the backwash to 1 – 95 minutes
or OFF using
or . Press «NEXT» to go to Step 9S.
Press «REGEN» to return to previous step.
STEP 9S. Set the length of the regenerant draw to 1 – 180
minutes or OFF using
Press «NEXT» to go to Step 10S. Press «REGEN» to return to
previous step.
This manual is the intellectual property of Ecosoft. Copying and reprinting is prohibited. © 2024
or .
or .
Setting
Units
PPM
kg of CaCO
3
dH or FH
m
3
Publicité
