Ecosoft FU1013CABDVUPBT Manuel page 12

MANUAL FOR ECOSOFT PINK SOFTENERS
12
6. QUICK SET UP GUIDE
STEP 5I. Time of Regeneration, Hour: Set the time
(hour) for regeneration using or . The default
time is 2:00 a.m. This display will show on 0 if Step 4S
or Step 3F is set to on 0.
Press «NEXT» to go to Step 6I. Press «REGEN» to return
to previous step.
STEP 6I. Time of Regeneration, Minutes: Set the
time (minutes) for regeneration using or .
The default time is 2:00 a.m. This display will not appear
if Step 4S or Step 3F is set to on 0.
Press «NEXT» to go to Step 7I. Press «REGEN» to return
to previous step.
STEP 7I. Backlight Operation: Set the normal activity of the LCD backlight using
or . If
value is set to:
• On, the backlight is always on.
• Off1, the backlight turns off after 5 minutes of no activity.
• Off2 + l/min, the backlight turns off after 5 minutes of no activity except with water flow
detection.
Press «NEXT» to exit Installer Settings. Press «REGEN» to return to previous step.
NORMAL MODE
This manual is the intellectual property of Ecosoft. Copying and reprinting is prohibited. © 2024