Publicité
Les langues disponibles
Les langues disponibles
MANUAL FOR ECOSOFT PINK SOFTENERS
11
6. QUICK SET UP GUIDE
After installing and powering up an Ecosoft FU or FK system, set display language, water hardness,
current time, and regeneration options in the Installer menu of control valve.
Use
and
buttons to change setting; «NEXT» button to save and go to next step; «CLOCK» to
save and exit menu; «REGEN» to move back one step.
To proceed, hold «NEXT» and
buttons simultaneously
for 3 seconds.
STEP 2I. Hardness: Set the amount of hardness as
calcium carbonate per PPM, using
or
.
Press «NEXT» to go to Step 4I.
Press «REGEN» to exit Installer Display Settings
STEP 3I. Service Water Hardness (PPM): If a mixing
valve is installed in the valve, service hardness needs
to be set. Setting range is always less than the setting
in Step 2I. This screen will only appear if Step 4S is set
to rES. Press «NEXT» to go to Step 4I. Press «REGEN» to
return to previous step.
STEP 4I. Set Day Override to 1 – 28 days or OFF using
or
. Press «NEXT» to go to Step 5I. Press «REGEN»
to return to previous step.
This manual is the intellectual property of Ecosoft. Copying and reprinting is prohibited. © 2024
Publicité
