VOX Amplification POWER BURST Manuel D'utilisation page 5

POWER BURST
- Setup
Turn off any equipment that's connected to this device.
1
Set the BOOST knob to the minimum level.
2
Connect the cable from your guitar or other instrument to the INPUT jack.
3
Connect the cable from the OUTPUT jack to your effect pedal, guitar amp or other equipment.
4
Turn on the externally connected equipment.
5
Press the effect switch, and use the BOOST knob and mode switch to adjust the tone.
|
When using an optional AC adapter
If you want to supply power from an AC adapter, connect a separately sold AC adapter (9 V,
600 mA or greater) to the DC 9V jack.
Using a different AC adapter may cause a malfunction.
Input impedance: 1 MΩ (varies depending on the conditions of use)
Connection jacks: IN jack (6.3 mm monaural phone jack), OUT jack (6.3 mm monaural phone jack),
DC 9V jack, LINK jack (3.5 mm TS mini-phone jack)
Power supply: one 9 V alkaline battery (6LF22/6LR61) or AC adapter (9 V,
greater, sold separately)
Battery life: Approximately 4 hours (9 V alkaline battery, continuous use; varies depending on the
conditions of use)
Current consumption: Approximately 70 mA (DC 9 V)
Dimensions (W × D × H): 72 × 120 × 55 mm/2.83˝ × 4.72˝ × 2.17˝, including protruding parts
Weight: 290 g/10.23 oz (including battery)
Included items: Customer Notice ("Dear Customer")
Accessories (sold separately): AC adapter (9 V,
* Specifications and appearance are subject to change without notice for improvement.
Setup
Specifications
, 600 mA)
4
,
, 600 mA or