GreenWorks CS80L04 Manuel D'opérateur page 16

EN
Problem
The motor runs,
but the chain
does not cut
correctly, or the
motor stops af-
ter around 3
seconds.
The machine
has stopped
working to pro-
tect internal cir-
cuits.
13 TECHNICAL DATA
Voltage
No load speed
Guide bar length
Chain pitch
Chain gauge
Possible cause Solution
2. Push the
trigger to
start the
machine.
The battery is Refer to battery
too hot or too and charger
cold. manual.
Release the
The machine is trigger and start
in the protection the machine
mode to protect again. Do not
the PCB. force the ma-
chine to cut.
Charge the bat-
tery. Refer to
the battery and
The battery is
charger manual
not charged.
for correct
charging proce-
dures.
Lubricate the
chain to de-
crease the fric-
The chain is not tion. Do not let
lubricated. the guide bar
and the chain
operate without
sufficient oil.
Cool the battery
Incorrect battery pack until it de-
storage temper- creases to the
ature ambient tem-
perature.
Operating tem- Move the ma-
perature of the chine to a cool,
machine is too dry location. Let
high. rest for 5-10 mi-
nutes at least. If
the protection is
frequent, ex-
tend the cooling
time.
80 V DC
25 m/s
20'' (508 mm)
0.325" (8.25 mm)
.050" (1.27 mm)
English
Drive links
Chain oil capacity
Weight (without battery
and charger)
Chain
Guide bar
Battery model
Charger model
The recommended ambient temperature range:
Item
Appliance storage tem-
perature range
Appliance operation tem-
perature range
Battery charging temper-
ature range
Charger operation tem-
perature range
Battery storage tempera-
ture range
Battery discharging tem-
perature range
14 LIMITED WARRANTY
Greenworks hereby warranties this product, to the
original purchaser with proof of purchase, for a period
of four (4) years against defects in materials, parts
or workmanship. Greenworks, at its own discretion
will repair or replace any and all parts found to be
defective, through normal use, free of charge to the
customer. This warranty is valid only for units which
have been used for personal use that have not been
hired or rented for industrial/commercial use, and
that have been maintained in accordance with the
instructions in the owners' manual supplied with the
product from new.
16
78
250 ml
13.2 lbs. (6 kg)
20LPX078X/95TXL078X
200PXBK041/200MLBK0
41
BAB723/BAB742 and
other BAB series
CAB812/GCH8040 and
other CAB series
Temperature
32°F (0°C) - 113°F
(45°C)
32°F (0°C) - 113°F
(45°C)
39°F (4°C) - 104°F
(40°C)
39°F (4°C) - 104°F
(40°C)
32°F (0°C) - 113°F
(45°C)
32°F (0°C) - 113°F
(45°C)
GARANTIE OUTIL &
BATTERIE • GARANTÍA PARA
HERRAMIENTAS Y BATERÍAS