Publicité
Les langues disponibles
Les langues disponibles
12
TROUBLESHOOTING
Problem
Possible cause Solution
The guide bar
The chain is too
and the chain
tight.
become hot and
The oil tank is
release smoke.
empty.
Contamination
causes a block-
age of the dis-
charge port.
Contamination
causes a block-
age of the oil
tank.
Contamination
causes a block-
age of the guide
bar and the oil
tank cap.
Contamination
causes a block-
age of the
sprocket or
guide wheels.
The motor runs
The chain is too
but the chain
tight.
does not rotate.
The guide bar
and the chain
are damaged.
English
Problem
Adjust the chain
tension.
Add oil.
Remove the
guide bar and
clean the dis-
charge port.
Clean the oil
tank. Add new
oil.
Clean the guide
bar and the oil
tank cap.
Clean the
sprocket and
the guide
wheels.
The motor runs
Adjust the chain
and the chain
tension.
rotates, but the
chain does not
Replace the
cut.
guide bar and
the chain if it is
necessary.
The machine
does not start.
15
Possible cause Solution
1.
Remove
the battery
pack from
the ma-
chine.
2.
Remove
the guide
bar cover.
3.
Remove
the bar
and saw
chain.
The motor is
4.
Clean the
damaged.
machine.
5.
Install bat-
tery pack
and oper-
ate the
machine.
If the sprocket
rotates, it
means the mo-
tor works prop-
erly. If not, call
service center.
Sharpen or re-
The chain is
place the saw
dull.
chain.
The chain is in
Turn the chain
the incorrect di-
loop to the oth-
rection.
er direction.
The chain is
Adjust the chain
tight or loose.
tension.
Pull the chain
brake in the di-
The chain brake
rection of the
is engaged.
user to disen-
gage it.
Make sure that
The machine
the battery re-
and battery are
lease button
not connected
clicks when you
correctly.
install the bat-
tery pack.
The battery lev-
Charge the bat-
el is low.
tery pack.
The lock out
1.
Push the
button and the
lock-out
trigger are not
button and
pushed at the
hold it.
same time.
EN
Publicité
