Télécharger Imprimer la page

Sharp K-61P27BNM-FR Guide D'utilisation page 40

Publicité

Les langues disponibles

Les langues disponibles

Semi-automatic time adjustment
(cooking period)
This function helps you to cook for a fixed
period of time. A time range between 0 and
10 hours can be set. Prepare the food for
cooking and put it in the oven.
1. Select the desired cooking function and
the temperature using the control knobs.
2. Press " " until you see "dur" and " "
symbol on the display screen. The
symbol " " and " " will flash.
3. Select the desired cooking time period
using the "+" and "-" keys.
4. The current time will reappear on the
screen, and the symbols " " and
remain illuminated.
When the timer reaches zero, the oven will
switch off and an audible warning will
sound. The symbols " " and
Turn both control knobs to the "0" position
and press any key on the timer to stop the
warning sound. The symbol will disappear
and press " " button the timer will switch
back to manual function.
Sound adjustment
To adjust the volume of the audible warning
sound, while the current time of day is
displayed, press and hold the "-" button for
3 seconds until an audible signal sounds.
"ton1" will appear on the display screen.
After this, each time the "-" button is
pressed, a different signal will sound. There
are four different types of signal sounds.
If "OFF" is selected, all sounds will be
turned off except alarm and error sounds.
Select the desired sound and do not press
any other buttons. After a short time, the
selected sound will be saved.
Brightness adjustment
To adjust the display screen brightness,
press and hold the "+" button for 3 seconds.
"br1" will appear on the display screen. After
this, each time the "+" button is pressed, a
different brightness will appear.
The Thermostat symbol
The thermostat symbol ( ) automatically
activates during oven thermostat is running.
The Pyrolytic symbol
The pyrolytic symbol ( ) automatically
activates during pyrolytic function is
running.
will
Door Lock
When the door lock button is pressed for 3
seconds, the door lock will be activated.
Press the door lock button again for 3
seconds to unlock the door .
will flash.
"Lock"appears on the screen for 5 seconds
while the pyrolytic door lock is activated. If
the door lock is active, "Lock" appears on
the screen for 5 seconds, time of day for 5
seconds.
The door lock can not be controlled while in
the pyrolytic function.
EN - 16

Publicité

loading